Home > Hard Drive > Hard Drive Is Toast! Is There Any Way To Revive It?

Hard Drive Is Toast! Is There Any Way To Revive It?


It's definitely last ditch… if you aren't going to pay the professionals and you have no other options. Also if you think this post might generate more responses in a different forum please let me know.Thanks!forthill 16 answers Last reply Apr 27, 2006 More about toasted hard drive boot If drive ‘Auto Detect' is enabled, make sure that its signature is shown at boot screen. Drive didn't show up in BIOS, ended up being a head and platter damage, which makes the cost go up because the platters were scratched. Check This Out

As to hitting a drive with a hammer, I have also had (partial) success doing that to a drive that clearly had suffered a head crash. Even if you happen to restart the faulty Slave drive, you must copy your info to the Master so that you are not placed in the same situation again because the You can also download free demo version without any problem. So, if you're going to knock a technique, it pays to have experience with it first, otherwise you come off looking pretty dumb. http://www.hirensbootcd.org/200-ways-to-revive-a-hard-drive/3/

Hard Drive Repair Software

I believe it is a combination of weak motor and surface-to-surface tension between the disk and heads. Some drives gradually suffer from spin-up problem but otherwise work fine once spinning. I could, but I have specialized knowledge in computer and electrical engineering and technician training and experience. I would have been happy if they'd actually tried the trick instead of just saying don't do it.

Also search Internet for further instructions on how to fix your particular problem using Hiren's Boot CD. Say what? [email protected]:~$ sudo fdisk -1 fdisk: invalid option -- '1' Usage: fdisk [options] change partition table fdisk [options] -l list partition table(s) fdisk -s give partition size(s) in blocks How To Repair Laptop Hard Disk Obviously, without a data or power cable, a hard drive will never work.

Attempting to recover data from a physically damaged disk usually results in further damage to the drive and little chance of recovering any data later. If.....that don?t work, move onto the extreme heat. Using your own analogy of the cost of shoplifting being baked into the goods they sell in a supermarket. https://www.cnet.com/forums/discussions/hard-drive-in-freezer-question-245494/ Reboot the system after running sys.6.

Even if your computer goes south, you might not be completely out of luck.Now, if you've had a hard-drive failure, you may be out of luck, but read on - I How To Fix Hard Drive Not Detected First step is to remove the drive from the machine. I am leaving now to fix a drive that belongs to a RAID pack because it seems to be out of the scope of this drive quiz.From: Earle PearceWhen a drive Sure, nothing wrong in advocating to choice a company that says, “Hey send us the drive, we’ll take a look at it and maybe do a preliminary test and we’ll then

How To Fix An External Hard Drive

Please share this information with everyone. https://support.corel.com/hc/en-us/articles/215909948-How-to-retrieve-data-from-a-spanned-disc-set-from-Toast He said occasionally when he boots up he gets an 'DISK BOOT FAILURE. Hard Drive Repair Software Even if you happen to restart the faulty Slave drive, you must copy your info to the Master so that you are not placed in the same situation again because the How To Fix Hard Drive Failure If a hard drive is failing it's usually because it is legacy equipment that often doesn't even support LBA mode.

It's not specific to hard drives. http://zuneuser.com/hard-drive/hard-drive-not-a-valid-win32-application-wont-open-my-e-drive-partition.php If there is no hardware error during the boot process, see if the c: drive can be accessed at all. Fortunately, "too late" is a relative term. I've just been lucky. How To Fix A Dead Hard Drive

If you know someone who has this information I'd love to hear it, but I don't even know if the codes are unique to each drive family. Therefore, the next time this happened it would not matter. Tango Icons Tango Desktop Project. this contact form Obviously if you don't have access to a sacrificial PCB then the value of buying one should be assessed.

So even if you didn't create a restore disk, you can just download the same release that's installed on the machine and use that as your restore. 2: Use the install How To Fix A Hard Drive That Won't Boot http://twitter.com/M_ANAS TheBitBucket Thanks for the Article, it has some useful info. Well, don't panic yet.

This problem usually shows up on older disks that have been running a few years (usually 24 hours a day) and then shut down for service or other reasons.?

NTFS partitions, what? Back in the 90's when consumer HD's were still young, a particular manufacturer (I'm pretty certain it was Seagate) had a problem with their HD's where upon power-down & cooling, the Remember that too much force can permanently damage the drive, but again, you have nothing too lose at this point.2. Hard Drive Repair Cost I'll be darned if it didn't work.

In many cases someone can get that information off of it.  Anders Andersson Actually, getting data off an SSD, at least most of it, would be trivial for any electronics engineer Try the drive in another machine, (slight drive voltage change assumed to be the miracle worker here).4. If not, try to "shock" it by setting it flat upon the table top, applying power, and rapping it on the side a couple of times with a plastic-faced hammer or http://zuneuser.com/hard-drive/hard-drive-enclosure-external-hard-drive.php Open the disc using Windows Explorer or My computer.

If your drive is still detected in BIOS, you may be able to use software tools to retrieve your data. Can't boot at all...HeLp! First, run a virus scan on the drive. You can try to fix it, but if your computer is older than four years it would be better - and possibly cheaper - to buy a new one. Click here for

The PCB may be fixed yourself.  Sometimes just by cleaning, re-seating, or depending on your ability, swapping out blown out parts. Kurt Tappe I can explain historically where the freezer and hammer suggestions originated. I don't put the HD for hours or a day. The best bet is to listen to your client to find out what absolutely must be recovered.6.

If it's the drive itself, I recommend taking baby steps to try to get it going.  Often times, the problem is just that it won't spin up.  Ya, bumping it gently Disk utilities like SpinRite, Disk First Aid, or Disk Rescue are useful (but only if the drive is actually spinning.)In every case, back up the data the minute you see anything You will see a folder containing a portion of the data in the set. It won't work if you have a fry circuit or crash heads on the platter or the mechanism is to far gone for this to work.

http://www.mrseb.co.uk/ Sebastian Anthony Awesome :) Loren Pechtel My understanding is that it could also come from the bearings sticking.  Whatever the details of the cause the basic pattern is the same-it's But, sometimes it isn't even the hard drive that?s causing the problem. I happened to open the closet for some other reason and discovered a warm box and immediately went through the shut down sequence to take it off line for a new Hey, I am not going to sacrify my weekend, drive the 10, 20 miles to you,  work on your computer and not be paid for at the very least the gas

i am mad that ebay would allow such people to rip you off of 10 dollars. Ubuntu Logo, Ubuntu and Canonical Canonical Ltd. If the drive can be seen but not accessed, most likely the partition table has gone corrupt. In many cases, FAT can be restored by executing Norton Utilities from floppy.